Di động An Toàn 30A 12/24 v Lượng Mặt Trời Pin Điều Sạc Điều Khiển Sạc-quốc tế + Follow
THÔNG TIN CHI TIẾT
- Mặt trời này bộ điều khiển sạc là tuyệt vời cho nguồn điện gia đình thế hệ hệ thống
- Được làm bằng vật liệu ABS cao cấp, không dễ dàng để lão hóa, an toàn và bền bỉ, xây dựng với 4 lỗ cho lắp đặt tiện lợi
- Khi pin điện áp thấp, bộ điều khiển sẽ tự động cắt tải từ hệ thống
- Hệ thống an toàn cung cấp sạc quá mức bảo vệ, bảo vệ ngắn mạch, quá tải bảo vệ và chống sét
Features:
- This solar charge controller is great for household power generation system.
- Made of high quality ABS material, not easy to aging, safe and durable, constructed with four holes for convenient installation.
- When the battery voltage is low, the controller will automatically cut off the load from the system.
- Safety systems provides overcharge protection, short circuit protection, over-load protection and lightning protection.
- The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
[img=765,765][/img]
Specifications:
Condition: 100% Brand New
Material: ABS
Color: Black
Rated Voltage: 12V / 24V (automatic switch)
Maximum Load Current: 30A
Input Voltage Range: 12~20V / 24~40V
Length≤1m Charging Loop Drop: <250mV
Length≤1m Discharge Circuit Drop: <50mV
Fully Charge Cut-off: 1.37~14.4V / 27.4~28.8V (data under no load condition)
Low Voltage Cut-off: 10.5~11V / 21~22V
Temperature Compensation: -3 mV / ℃ / battery
No Load Loss: ≤10mV (10A / 15A); ≤20mV (20A / 30A)
Efficiency: 95%~97%
Maximum Wire Area: 2.5mm² (10A / 15A); 4mm² (20A); 6 mm² (30 A)
Ambient Temperature: -25℃~55℃
Size(L x W x H): approx. 13.2 x 7 x 3cm / 5.20 x 2.76 x 1.18inch
Weight: approx. 135g
Package Included:
1 x Solar Charge Controller
Wiring Instruction:
1. Storage battery "+", "-": the 3rd, 4th terminal(from the left)
load indicator light flashes once and will light up after 15 seconds, which shows correct
connection, otherwise it will cause damage to controller.
2. Solar panel "+", "-": the 1st, 2nd terminal(from the left)
3. Load "+", "-": the 5th, 6th terminal(from the left)
Indicator Light Instruction:
1. Charge indicator light: light up showing it's at powerful charging status; flash showing it's at
floating charging status; doesn't light showing that charging is finished.
2. Load indicator light: light up showing there is output, load can normally work; otherwise the
load can't work.
Note:
1. Before wiring please check out the rated voltage of solar panel, storage battery, load carefully, ensure they are all 12V of voltage or all 24V.
2. Rated current of solar panel and load can not more than the rated current of controller(30A).
3. Do not directly use solar panel battery to power load.
4. Do not use light to charge solar panel, because it is insufficient when charging by light bulb.
- Thương hiệu OEM
- SKU OE680ELAAKIRISVNAMZ-43250432
- Dòng sản phẩm Sweetbaby123-MY
- Loại bảo hành No Warranty
Bộ sản phẩm bao gồm1 x Solar Charge Controller
0 Bình luận
Bình luận