3D Printer Board MKS MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch - intl + Follow
THÔNG TIN CHI TIẾT
- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like
- Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t
- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
- Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to
Features: 1. 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectorsand malfunctioning.
2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
3. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
4. Use high-quality MOSFET, better cooling effect and more stable.
5. Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.
6. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.
7. Use CH340 serial port chip, more easily install the drive than 16U2.
8. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
9. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4.
10. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
11. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
12. Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
Specifications:
Type: MKS GEN L V1.0 Controller Board
Application: 3D Printer
Package Weight: About 130g
Package List:
1 * MKS Gen-L V1.0
1 * 53cm USB Cable
(Not including other items.)
Note:
Please do not connect positive and negative electrode reversely.
Please do not plug/unplug or adjust the current of the stepper motor drive while it is working.
Please do not plug/unplug or adjust the current of the stepper motor drive while it is working.
- Thương hiệu OEM
- SKU 220940595_VNAMZ-277761585
- Dòng sản phẩm Swe-MY
- Loại bảo hành No Warranty
Bộ sản phẩm bao gồm1 * MKS Gen-L V1.0, 1 * 53cm USB Cable, (Not including other items.)
0 Bình luận
Bình luận