Auto Bed Leveling Sensor with Auto Leveling Feature 3D Touch For 3D Printer - (black) + Follow
THÔNG TIN CHI TIẾT
- 1. 3Dtouch can be easily applied because of its small size and simple structure. Gathering information and firmware settings will be an easy task, because the 3dtouch works as usual, the automatic bed leveling sensor.
- 2. Intelligence: self test: push the nail operation two times when the power is on.
- 3. High precision: the standard deviation of repeatability 3dtouch is about 0.005mm, and the accuracy is high.
Auto Bed Leveling Sensor with Auto Leveling Feature 3D Touch for 3D Printer
Features:
1. 3Dtouch can be easily applied because of its small size and simple structure. Gathering information and firmware settings will be an easy task, because the 3dtouch works as usual, the automatic bed leveling sensor.
2. Intelligence: self test: push the nail operation two times when the power is on.
3. High precision: the standard deviation of repeatability 3dtouch is about 0.005mm, and the accuracy is high.
4. The stationary state, while the pin pulled out or retracted, no current flow solenoid valve, the standby current of the equipment is lower than the average current of 15mA, and in the work state, pin suddenly moves about 100ms the equipment back in less than 300mA. Low power consumption even further reduces Joule heating to prevent heat problems.
5. Bed width selection:
3dtouch does not use any light, do not close (the inductance / capacitance sensor).
3dtouch control through the Holzer effect, providing high accuracy. So the bed material is free to choose.
6. Optimized structure: larger volume.
7. 3DTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface.
8. 3DTouch features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on.
Warm Tips:
Some 3D printer motherboard has insufficient of 5V power supply, it may need external 5V power supply, which is difficult to probe launch, or the action logic circuit protection master restart.
If encountered, it is generally recommended to use the DC-DC buck module to take power from the main power supply.
1. +5V and GND do not reverse long time reversed, there may be burned (wiring: 3d-touch wiring 3Pin: Black (- GND), Red (+ 5V) blue (control signal) 2PIN: Black (-, GND) yellow (Zmin)
2. When installing, please keep away from strong magnetic, motor and fan, and other magnetic components.
3. Accidental impact of probe aluminum rods may damage or affect detection accuracy.
4. Adjusting or reassembling the probe's tightening screws requires threading glue.
5. Avoid shell deformation when installing probes.
6. Pulling aluminum rods will damage or affect the detection accuracy.
Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
- Brand Vktech
- SKU VK646ELAAGFMTHVNAMZ-34169707
- Model HappyDeals-1DU8KY0EJ8MB8WH1
- Warranty Type No Warranty
What’s in the box1 x 3D-touch Probe
2 x M2.5 Screws
2 x M2.5 Nut
1 x 2Pin Female To Female Dupont Line
1 x 3Pin Female To Female Dupont Line
1 x Connection Cable
Về Album
- 0
- 0
- 356
- 0
- 0
- 281
22-10-2018 19:22
- 0
- 0
- 303
Minh: Máy In Ngày Sản Xuất DY8 - Máy In Hạn Sử Dụng DY8
22-10-2018 19:50
- 0
- 0
- 271
Cao: Mực in InkTec Hàn Quốc 1 Lít màu vàng dùng cho tất cả máy in phun màu Epson L110 / L220 / L300 / L310 / L360 / L365 / L565 / L805 / L1300...
22-10-2018 22:08
- 0
- 0
- 328
Nam: BolehDeals Đồng Máy Đùn Vòi Phun Đồng Đầu Ở chợ MK10 1.75 mét 3D Máy Năm 0.2 mét-quốc tế
22-10-2018 22:32
- 0
- 0
- 304
Giang: Yika 1.75mm Print Filament PLA 10M Modeling for 3D Drawing Printer Pen MakerBot
22-10-2018 22:40
- 0
- 0
- 291
Cao: Hộp mực 35A dùng cho máy in HP Laserjet P1005 /1006 và Canon LBP 3018/3010/3050/3020/3100.
22-10-2018 23:50
- 0
- 0
- 284
Quang: Hộp mực in 35A cho máy HPLaser P1005, P1006, P1008 và Canon 3050, 3100, 3150
23-10-2018 05:39
- 0
- 0
- 283
Luan: BolehDeals Giàn Phơi Phụ Kiện 1.75 mét Dây Tóc Ăn Phía Bên Phải cho XYZ Đồng Bằng Máy In-quốc tế
23-10-2018 19:19
- 0
- 0
- 283
Loc: Areyourshop 3D Printer Filament 1.75mm PLA 5M For Drawing Print Pen MakerBot Yellow
23-10-2018 20:15
- 0
- 0
- 275
Huy: Hộp Mực dùng cho Máy In Canon imageCLASS MF229d Thương hiệu Techone (Dòng sản phẩm: HP CRG-CF283A / Canon EP-337: Màu đen - Mới 100%)
23-10-2018 20:49
- 0
- 0
- 288
Huy: Sway 1.75mm 20 Color 1.75MM PLA Filament for 3D Drawing Printer Pen Consumables(20 Bag Random color)
23-10-2018 21:03
- 0
- 0
- 261
Tuyen: 1 bộ 6 màu Mực Nước Inkmate Dung tích 500ml Dùng cho máy in màu
23-10-2018 23:58
- 0
- 0
- 274
Sang: Hộp mực dành cho máy in Canon LBP 3018/3010/3050/3020/3100 (35A)
24-10-2018 19:48
- 0
- 0
- 295
Tuyen: 3D In Phần Cao Nhiệt Độ Chịu Nhiệt Polyimide Băng Keo (Lạc Đà) -25 mét x 30 mét-quốc tế
24-10-2018 21:14
- 0
- 0
- 290
Nam: 10 Pcs GT2 6mm Width Bore Pulley For 3D Printer size:20T 5mm - intl
25-10-2018 00:14
- 0
- 0
- 299
Phuc: Mực in laser Canon Cartridge 303 Canon 2900/ 3000 (Đen)
25-10-2018 03:10
- 0
- 0
- 300
Huy: Mực In Phun Màu Inktec 1 Lít (Hàn Quốc) (Đen) dùng cho Epson/canon/ L310/L360/L365/L1300/L1800/L805
0 Bình luận
Đăng nhập để gửi bình luận
Bình luận