Micro SD Storage Board TFT/SD Card Memory Shield Module For Arduino DUE + Follow
THÔNG TIN CHI TIẾT
- LCD Backlight (LEDA+) 3.3V., 5V or PWM select
- On board SD card slot with adjustable CS selection
- LCD power 3.3V and 5V selectable through solder jumpers
- Compatible with 40-pin version LCD, which is commonly used in TFT Mega shield
- Also comptabile with 32-pin version LCD, which is commonly used in STM32 development board
Description:
Now, you can drive TFT LCD in a much faster speed using 84Mhz Ardiuno DUE. The shield is designed to fit two types of LCD:
1. 40pin version LCD which is commonly used in previous version of TFT Mega shield for Arduino MEGA 2560
2. 32pin version LCD which is commonly used in STM32 development board. (unsoldered)
The shield route all the LCD data pins to port PC1-PC8 and PC12-19, control pins to PD0-PD3, this design can acheive high speed data transfer (three cycles per write strobe to the LCD) to maximize LCD display speed. The SPI interface (for SD or flash control) is route to the ISP header of arduino DUE, so that high speed SPI transfer with DMA can be achieved.
Drive TFT LCD on arduino DUE by just plugging into arduino DUE main board, no flying wires
Compatible with 40-pin version LCD, which is commonly used in TFT Mega shield
Also comptabile with 32-pin version LCD, which is commonly used in STM32 development board
On board SD card slot with adjustable CS selection
On board SPI flash footprint with adjustable CS selection, for upgrade include Font IC to draw text to the LCD and also support SPIFlash library
LCD power 3.3V and 5V selectable through solder jumpers
LCD Backlight (LEDA+) 3.3V., 5V or PWM select
Specification：
The shield is compatible with Arduino DUE and the following LCD:
2.2" TFT LCD Module (220x176)
2.8" TFT LCD Module (320x240)
3.2" TFT LCD Module with Font IC (320x240)
3.2" High Resolution TFT LCD Module with Font IC (480x320)
3.5" TFT LCD Module with Font IC (480x320) (Full viewing angle IPS panel)
4.0" TFT LCD Module with Font IC (480x320)
4.3" TFT LCD Module with Font IC (480x272)
5.0" TFT LCD Module with Font IC (800x480)
7.0" TFT LCD Module with Font IC (800x480)
Specifications:
Compatible with 40-pin version LCD, which is commonly used in TFT Mega shield
Also comptabile with 32-pin version LCD, which is commonly used in STM32 development board
On board SD card slot with adjustable CS selection
On board SPI flash footprint with adjustable CS selection, for upgrade include Font IC to draw text to the LCD and also support SPIFlash library
LCD power 3.3V and 5V selectable through solder jumpers
LCD Backlight (LEDA+) 3.3V., 5V or PWM select
Package Included:
1 x CTE TFT LCD / SD Card Shield For Arduino DUE
Notes:
Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement.
Please leaving a message before you give the bad feedback, if the products have some problems.
Thanks for your understandings
- Brand OEM
- SKU 211647128_VNAMZ-264928898
- Model DA64938
- Warranty Type No Warranty
- RGB Lighting No
What’s in the box1 x CTE TFT LCD / SD Card Shield For Arduino DUE
0 Bình luận
Bình luận