MKS-BASE V1.5 RepRap 3D Printer Controller Motherboard Mainboard Parts + Follow
THÔNG TIN CHI TIẾT
- The use of high-quality MOSFET tube, cooling effect is better
- Using a dedicated power chip, support 12V-24V power input, solve the Ramps voltage conversion chip fever problems
- Can accept 24V input, the same system power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problems
3D Printer Controller Motherboard Mainboard Parts Compatible with Integrated Driving
MKS-BASE V1.5 RepRap 3D Printer Controller Motherboard Mainboard Accessories
Description:
1. MKS-BASE is design to solve the problem of Ramps1.5, Megatronics V2.0 and other open source motherboard, especially suitable for manufacturers who want to mass production of 3D printer, take this product as a control board to use.
2. Give full consideration to stability, heat dissipation, ease of use issues, after continuous print reliability testing.
3. Compared with MKS-BASE V1.4, add two fan port, the terminal color changed.
4. Adapt cable can refer to: 2PIN, 3PIN, 4PIN.
5. Can be directly connected to 2004LCD or 12864LCD (remove the L-shaped adapter plate), since the 2004LCD and 12864LCD open source design is only regulated EXP1 and EXP2 PIN port, there is no specific direction on the horn insertion direction, so some of the 2004LCD and 12864LCD data cable bayonet direction is different, need to be inserted in return.
Features:
1. All the functions focus on a board, solves the problem of complex and frequency malfunctioning of Ramps 1.5 integrated port.
2. Using 4982 as a motor driver, it's performance is nearly same as 4988 , but the SOP package, cooling effect is better.
3. Circuit boards using high-quality 4-layer board, and specifically for cooling optimization, ramps is 2-layer board.
4. The use of high-quality MOSFET tube, cooling effect is better.
5. Using a dedicated power chip, support 12V-24V power input, solve the Ramps voltage conversion chip fever problems.
6. Can accept 24V input, the same system power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problems.
7. The firmware can use open source firmware Marlin, exactly the same configuration with ramps 1.4, Ramps 1.4 can be directly replaced.
8. Can be directly connected Ramps 1.5, 2004LCD control board and 12864LCD control board.
- Brand VAKIND
- SKU 155360200_VNAMZ-164919378
- Model crystalawaking-1RF8YR8BM0KQ5EG3
- Warranty Type No Warranty
What’s in the box1 X Control Board
1 X Data Cable
Về Album
29-09-2018 07:32
- 0
- 0
- 282
Huy: MagiDeal 2pcs 3D Printer Linear Bearing Polymer Shaft Solid Plastic Kits RJMP-01 10mm
29-09-2018 19:26
- 0
- 0
- 286
Giang: 2pcs Openbuilds Bearing Idler Pulley Gear Perlin Wheel for 3D Printer Part
29-09-2018 19:29
- 0
- 0
- 313
Giang: Hộp mực in Cartridge prinmax 15A dành cho máy in HP - Kim Hải Computer
29-09-2018 22:25
- 0
- 0
- 315
Phong: Mực máy in phun màu Brother DCP - T300/ T500W/ T700W/ T800W Thương Hiệu InKTec (M/Magenta - Màu đỏ - 1liter/Bot)
29-09-2018 22:36
- 0
- 0
- 286
Ngan: Hộp mực in Cartridge prinmax 36A dành cho máy in HP 1505/M1522/M1120 - Clover Shop
29-09-2018 23:40
- 0
- 0
- 291
Dat: 26 t Máy In 26 răng Gear 11 mét X 11 mét Cho Diy 3d Máy In Máy Đùn-quốc tế
30-09-2018 01:06
- 0
- 0
- 291
Nam: 3D Printer 200x200x3mm Heating Bed Block Preservation Insulation Cotton
30-09-2018 02:15
- 0
- 0
- 287
Luan: Mực in Toner Cartridge Máy photocopy Xerox 2060/3060/3065
30-09-2018 10:08
- 0
- 0
- 334
Huy: Giấy In Ảnh Cao Cấp Lexmark 1 Mặt Siêu Bóng (High Glossy) L (8.9 x 12.7cm) 240gsm 100 tờ
30-09-2018 11:31
- 0
- 0
- 304
Phuc: Gạt mực máy photo Ricoh Aficio 1022, 1027, 3025, 3030, MP2510, 2852
30-09-2018 11:36
- 0
- 0
- 335
Cao: Kim loại PLA Pha Trộn 3D Dây Tóc 1.75 mét 500 gam (N. w.) /1.1lb cho 3D Máy Trong RepRap thay thế chất liệu silicone dùng cho Đồng Hồ thông minh apple iwatch series 1 series 2
30-09-2018 11:47
- 0
- 0
- 268
Minh: Bộ mực 4 màu (Đen, xanh, đỏ, vàng) máy Canon Pixma E560, E510, E500
30-09-2018 14:27
- 0
- 0
- 294
Phuc: Epson 664 BK màu đen-cho epson l300/310/350/360/L1300 hàng bóc máy
30-09-2018 14:30
- 0
- 0
- 263
Dat: 10 hộp mực 2900/3000/Hp 1010/1018/1020 mã 12A nhập khẩu
30-09-2018 14:42
- 0
- 0
- 270
Huy: Hộp mực máy in Canon FX-9 (Canon MF 4320D - Black)
30-09-2018 17:16
- 0
- 0
- 301
Phuc: Bộ 5 chiếc Trống dùng cho máy in HP 1005/1006/1505
30-09-2018 19:40
- 0
- 0
- 291
Loc: Hộp mực dùng cho máy in canon 6030 - 6030W ( EP 325).
30-09-2018 20:31
- 0
- 0
- 315
Ngan: Proximity Switch LJ12A3-4-ZBX DC 3-wire NPN 6-36V M12 Inductance Proximity Approach Switch for 3D Printer
30-09-2018 22:16
- 0
- 0
- 265
Phong: Hộp mực Cartridge 308 dùng cho máy in Canon 3300
0 Bình luận
Đăng nhập để gửi bình luận
Bình luận