1200 wát DC-DC Tăng Cường Bộ Chuyển Đổi Nguồn điện 8-60 v 12 v gia re 24h

1200 wát DC-DC Tăng Cường Bộ Chuyển Đổi Nguồn điện 8-60 v 12 v gia re 24h

1200 wát DC-DC Tăng Cường Bộ Chuyển Đổi Nguồn điện 8-60 v 12 v Bước lên đến 12-83 v 24 v 48-quốc tế
1200 wát DC-DC Tăng Cường Bộ Chuyển Đổi Nguồn điện 8-60 v 12 v Bước lên đến 12-83 v 24 v 48-quốc tế
1200 wát DC-DC Tăng Cường Bộ Chuyển Đổi Nguồn điện 8-60 v 12 v Bước lên đến 12-83 v 24 v 48-quốc tế
1200 wát DC-DC Tăng Cường Bộ Chuyển Đổi Nguồn điện 8-60 v 12 v Bước lên đến 12-83 v 24 v 48-quốc tế
312 Xem
309,000 đ 309000

Tags

    THÔNG TIN CHI TIẾT


    • Điện áp đầu vào: 8-60 v
    • Dòng điện đầu vào: 20A
    • Quiescent hiện tại: 15mA (12 v lít 20 v, điện áp đầu ra, cao hơn hiện tại sẽ tăng quá yên tĩnh)
    • Điện áp đầu ra: 12-80 v có thể điều chỉnh liên tục
    • Dòng điện đầu ra: 20A MAX trên 15A, xin tăng cường tản nhiệt (đầu vào, đầu ra áp lực liên quan, càng lớn áp suất nhỏ hơn các dòng điện đầu ra)

    Features:
    Large heat sink design.
    Supports a wide input voltage 12-60V, 12- 83V wide adjustable output voltage, low dropout voltage.

    Specification:
    Input voltage: 8-60V
    Input current: 20A
    Quiescent current: 15mA(12V liter 20V, the output voltage, the higher the current will increase too quiet)
    Output voltage: 12-80V continuously adjustable
    Output current: 20A MAX over 15A, please enhance heat dissipation(input, output pressure related, the greater the pressure the smaller the output current)
    Constant Range: 0.5-20A
    Working temperature: -40℃~85℃
    Operating frequency: 150KHZ
    Conversion efficiency: up to 95%
    Overcurrent protection: Yes
    Short circuit protection: Yes
    Input reverse polarity protection: None
    Output Counter filling: Yes
    Installation: four 3mm screws
    Connection: solderless terminals output
    Product size: approx. 130 x 52 x 49mm/5.11 x 2.04 x 1.92''
    Net Weight: approx. 258g
    Gross Weight: approx. 262g

    Note:
    1. The input power supply voltage must be above 8V.
    2. Do the input power supply switching power supply, the case load of the first connected input source and regulate voltage. Then pick up the load. (Must ensure that the switching power supply has been working), or regulate the first no-load voltage, then switch the power supply open the case. When the voltage is lower than 8V, the chip has not been working. It is easy to MOS tube breakdown.
    3. When a constant voltage to constant-current mode have to ensure a constant voltage must be higher than the input voltage.
    4. Please allow 1-3mm differs due to manual measurement.
    5. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.









    • Thương hiệu OEM
    • SKU OE680ELAABBYXKVNAMZ-22855268
    • Dòng sản phẩm lotsgoods-1KV1KR9VW4EP9RW2
    • Loại bảo hành No Warranty

    Bộ sản phẩm bao gồm1 x Converter Boost Power Supply Module

    0 Bình luận

    1. Đăng nhập để gửi bình luận

      Bình luận

    8
    • 0
    • 0
    • 589
    4
    • 0
    • 0
    • 298
    7
    • 0
    • 0
    • 329
    6
    • 0
    • 0
    • 349
    6
    • 0
    • 0
    • 383
    3
    • 0
    • 0
    • 331
    8
    • 0
    • 0
    • 302
    7
    • 0
    • 0
    • 340
    8
    • 0
    • 0
    • 324
    5
    • 0
    • 0
    • 352
    7
    • 0
    • 0
    • 342
    7
    • 0
    • 0
    • 364
    6
    • 0
    • 0
    • 324
    8
    • 0
    • 0
    • 302
    6
    • 0
    • 0
    • 349

    Phím tắt: L hoặc F Like

    Trở về đầu trang