EWRF e7092TM 5.8G 48CH 25mW/100mW/200mW/OFF Power Adjustable AIO VTX FPV Transmitter Support SBUS + Follow
THÔNG TIN CHI TIẾT
- Mô hình: EWRF e7092TM
- Tần số: 5.8 gam 48CH
- Truyền tải Công Suất: 25 mw/100 mw/200 mw/TẮT (Pitmode)
- Nguồn điện cung cấp: DC72-24 v (1 s)
- Dòng cung cấp: 120mA (25 mw)/160mA (100 mw)/220mA (200 mw)
- Trọng lượng: 3.1 gam (Bao Gồm Cả ăng ten trọng lượng 1 gam) 4 gam
- Kích thước tiêu chuẩn: 24.0x24.0 mét
- Lỗ gắn: 20x20 mét
EWRF e7092TM 5.8G 48CH 25mW/100mW/200mW/OFF Power Adjustable AIO VTX FPV Transmitter Support SBUS
Specifications
Model: EWRF e7092TM
Frequency: 5.8G 48CH
Transmitting Power : 25mW/100mW/200mW/OFF(Pitmode)
Power supply : DC72 -24V(1S)
Supply current : 120mA(25mW)/160mA(100mW)/220mA(200mW)
Weight : 3.1g(Including antenna weight 1g)4 g
Standard size:24.0x24.0mm
Mounting holes:20x20mm
Main Features
Adjustable 4 modes:25mW/100mW/200mW/OFF
Betaeltflight/Cleanflight OSD configuring Support SBUS configuring parameter
Clean powerup and channel switching without interference to others
Miniature and light weight design
User Guide
1. Setting
After power on, the digital display shows the following three parameters in turn: channel, band and power.Press and hold the button until the red dot appears on the right bottom of the digital display, which can be entered into the parameters setting.
When the digital display shows the Arabic numerals for the channel (1-8),press the button can select the channels.
Press and hold the button again,the digital display will shows the alphabet for band(A-b-c-d-E-F), press the button can select the bands.
Press and hold the button again,the digital display will shows the indication for power(H:200mW,U:100mW,L:25mW,-:OFF), press the button can select the power.
Finally, press and hold the button,the red dot on the right bottom of the digital display will disappear.VTX is back to normal working state and the channel,band,power will display in turn on the digital display.
2. PWMSBUS/OSD setting
When SBUSPWM port is connected with a RC receiver, it can been used to change transmitter parametersAV channels 1-8 and to shut transmitting by a RC( PITMODE in effect). Make sure that there is a SBUSPWM signal from receiver within 3 seconds after powering up ,otherwise the transmitter is back to button-press setting mode . When in the setting mode of SBUSPWM, the red dot on the digital display will glow.
For Betaflight/Cleanflight OSD setting of power,bands,channels and Pitmode ,please referring to ‘EWRF 5.8G AV TX OSD SettingBetaflight OSD setting of EWRF Transmitter’for details.
Frequency(Mhz)
Band
CH1
CH2
CH3
CH4
CH 5
CH6
CH7
CH8
A
5865
5845
5825
5805
5785
5765
5745
5725
b
5733
5752
5771
5790
5809
5828
5847
5866
c
5705
5685
5665
5645
5885
5905
5925
5945
d
5740
5760
5780
5800
5820
5840
5860
5880
E
5658
5695
5732
5769
5806
5843
5880
5917
F
5362
5399
5436
5473
5510
5547
5584
5621
Note:
1.Make sure that there is enough space for airflow when installing the module on the drone in case the overheating protection starts to reduce the power even to shut down at the worst.
2. Please install the antenna before powering up for a longer use life.
3. .The maximum current of output DC 5V is 300mA.
Package Included
1 x EWRF e7092TM Transmitter Module
- Brand Not Specified
- SKU NO128TBAALHN59VNAMZ-45409725
- Model Audew-SKU875462
- Warranty Type No Warranty
What’s in the box1 x EWRF e7092TM Transmitter Module
0 Bình luận
Bình luận